Licensing guide · Alberta

How to Become a Cathodic Protection Technician - Level One in Alberta

Last checked 3 sources checked

Do you need certification?

Certification is voluntary

Cathodic protection technician - level one is a voluntary trade in Alberta. You can work in the trade without a certificate.

Protected titles
Not listed in the sources checked
Show the source
“register as an apprentice and work under the supervision of a qualified individual, be a certified journeyperson, hold a recognized trade certificate , or have an employer that is satisfied you have the skills and knowledge expected of certified journeyperson. … Cathodic Protection Technician - Level One”

From tradesecrets.alberta.ca/trades-in-alberta/optional-certification-tr..., checked October 11, 2026.

At a glance

Licence status
Voluntary certification See the source
Routes
Annual fees
Not stated by the regulator Check with Alberta Apprenticeship and Industry Training

Your roadmap

Every route is listed. Follow the one that matches where you trained.

Licensed in another province

  • 4 steps without a listed fee

  1. Complete at least 18 months and 1,500 hours of work experience.

    Source
    “A minimum of 18 months AND 1,500 hours of work experience.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  2. Successfully complete and verify one of the listed courses, such as the Enform (Energy Safety Canada) Cathodic Protection Rectifier course or the Corrpro Authorization Course.

    Source
    “Successful completion and verification of ONE of the below courses*: Enform (Energy Safety Canada) Cathodic Protection Rectifier, OR Corrpro Authorization Course”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  3. Provide an Employer Declaration Letter.

    Source
    “An Employer Declaration Letter (EDL).”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  4. Pass a theory exam.

    Source
    “A successful theory exam.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with Alberta Apprenticeship and Industry Training

4 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Trained outside Canada

  • 4 steps without a listed fee

  1. Complete at least 12 months and 1,000 hours of work experience.

    Source
    “A minimum of 12 months AND 1,000 hours of work experience.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  2. Successfully complete and verify one of the listed courses from The Association for Materials Protection and Performance (AMPP - formerly NACE International), such as CP-1 Tester, CP-2 Technician, CP-3 Technologist, CP-4 Specialist, the old NACE courses, or the AMPP Basic Corrosion and AMPP Corrosion Prevention in Oil & Gas Production courses.

    Source
    “Successful completion and verification of ONE of the below courses* from The Association for Materials Protection and Performance (AMP P - formerly NACE International): CP-1 Tester, CP-2 Technician, CP-3 Technologist, CP-4 Specialist, The (old) NACE Basic Corrosion Course & (old) NACE Corrosion Prevention by Cathodic Protection, OR AMPP Basic Corrosion & AMPP Corrosion Prevention in Oil & Gas Production.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  3. Successfully complete and verify one of the listed courses, such as the Enform (Energy Safety Canada) Cathodic Protection Rectifier course or the Corrpro Authorization Course.

    Source
    “Successful completion and verification of ONE of the below courses*: Enform (Energy Safety Canada) Cathodic Protection Rectifier, OR Corrpro Authorization Course.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  4. Pass a theory exam.

    Source
    “A successful theory exam.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with Alberta Apprenticeship and Industry Training

4 steps without a listed fee, so the total may not be the full cost.

Requirements

Conditions the regulator sets on top of the roadmap steps.

Education

  • Applicants using the Trades Qualifier - Work Experience Program must successfully complete and verify one of the listed courses, such as the Enform (Energy Safety Canada) Cathodic Protection Rectifier course or the Corrpro Authorization Course.

    Source
    “Successful completion and verification of ONE of the below courses*: Enform (Energy Safety Canada) Cathodic Protection Rectifier, OR Corrpro Authorization Course”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  • Applicants using the Trades Qualifier - Recognized Training Program must successfully complete and verify one of the listed courses from The Association for Materials Protection and Performance (AMPP - formerly NACE International).

    Source
    “Successful completion and verification of ONE of the below courses* from The Association for Materials Protection and Performance (AMP P - formerly NACE International): CP-1 Tester, CP-2 Technician, CP-3 Technologist, CP-4 Specialist, The (old) NACE Basic Corrosion Course & (old) NACE Corrosion Prevention by Cathodic Protection, OR AMPP Basic Corrosion & AMPP Corrosion Prevention in Oil & Gas Production.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

  • Applicants using the Trades Qualifier - Recognized Training Program must also successfully complete and verify one of the listed courses, such as the Enform (Energy Safety Canada) Cathodic Protection Rectifier course or the Corrpro Authorization Course.

    Source
    “Successful completion and verification of ONE of the below courses*: Enform (Energy Safety Canada) Cathodic Protection Rectifier, OR Corrpro Authorization Course.”
    tradesecrets.alberta.ca/trades-in-alberta/profiles/2101

Experience

Already licensed in another province?

Not stated

The pages do not state how someone already licensed in another Canadian province or territory can register in Alberta.

Source
“If you have previous experience in the trade (in or outside of Alberta), get your hours verified and take exams to qualify for your Journeyperson Certificate.”
tradesecrets.alberta.ca/trades-in-alberta/about-designated-trades

Processing time: Not stated by the regulator Check with Alberta Apprenticeship and Industry Training

Check a move between two provinces

Credential assessment

Not stated by the regulator Check with Alberta Apprenticeship and Industry Training

Exams

Language tests

Not stated by the regulator Check with Alberta Apprenticeship and Industry Training

Compare scores across provinces and professions

Canadian experience

Not stated by the regulator Check with Alberta Apprenticeship and Industry Training

Supervised practice

Not stated by the regulator Check with Alberta Apprenticeship and Industry Training

Demand and pay

No Job Bank wage or outlook data for this occupation yet.

Cathodic protection technicians - level one in other provinces and territories

Regulated in 0 of the other 12 jurisdictions checked so far. The rules differ from one place to the next.

  • British Columbia Not confirmed yet
  • Saskatchewan Not confirmed yet
  • Manitoba Not confirmed yet
  • Ontario Not confirmed yet
  • Quebec Not confirmed yet
  • New Brunswick Not confirmed yet
  • Nova Scotia Not confirmed yet
  • Prince Edward Island Not confirmed yet
  • Newfoundland and Labrador Not confirmed yet
  • Yukon Not confirmed yet
  • Northwest Territories Not confirmed yet
  • Nunavut Not confirmed yet

Compare cathodic protection technician - level one licensing across Canada

Sources checked

Pages read on October 11, 2026.

  1. Tradesecrets - Optional Certification Trades tradesecrets.alberta.ca/trades-in-alberta/optional-certification-tr... · fetched October 8, 2026
  2. Tradesecrets - Cathodic Protection Technician - Level One tradesecrets.alberta.ca/trades-in-alberta/profiles/2101 · fetched October 10, 2026
  3. Tradesecrets - About Designated Trades tradesecrets.alberta.ca/trades-in-alberta/about-designated-trades · fetched October 9, 2026

Frequently asked questions

2

Do you need a licence to work as a cathodic protection technician - level one in Alberta?

No. Certification is available, but it is not required to work in the trade in Alberta. Certification is managed by Alberta Apprenticeship and Industry Training.

Which exams are required?

theory exam.

Getting Licensed? Get Your Resume Ready Too

Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.

Schedule a Call

Free consultation. No commitment.