How to Become an Architectural Sheet Metal Worker in British Columbia
Do you need certification?
Certification is voluntary
Architectural sheet metal worker is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.”
From skilledtradesbc.ca/architectural-sheet-metal-worker, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 2 steps
- Trained outside Canada: 7 steps, listed one-time fees $120
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
Interested applicants learn how to start an apprenticeship in this trade.
Source
“Interested in this trade? Learn how to start your apprenticeship.”
skilledtradesbc.ca/architectural-sheet-metal-worker -
Apprentices complete 4800 hours of work-based training.
-
Apprentices complete 18 weeks of technical training over 3 years with a designated training provider.
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- 2 steps without a listed fee
-
Applicants hold a Certificate of Qualification from a trade board in Canada and are certified and in good standing with the appropriate provincial or territorial authority.
Source
“Recognition applies to individuals who are certified and in good standing in their trade with the appropriate provincial or territorial authority.”
skilledtradesbc.ca/labour-mobility -
SkilledTradesBC recognizes the certificate and the applicant does not have to re-certify or get a re-issued certificate.
Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/labour-mobility
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
2 steps without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 7 done
- Listed one-time fees: $120
- 6 steps without a listed fee
- Listed time: 1.4 to 1.8 months (only 1 of 7 steps state a time)
-
Applicants search for their trade and review the Employer Declaration or Statutory Declaration form to find the required hours of work experience, percentage of job task experience and any prerequisite credentials.
Source
“Review the Employer Declaration or Statutory Declaration form (near the bottom of your trade page), where you can find the hours of work experience, percentage of job task experience and any prerequisite credentials required.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Once eligibility is confirmed, applicants create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Applicants complete and submit their application through the Portal in English, including an Employer or Statutory Declaration for each period of work experience listed.
- Application fee: $120
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Complete and submit your application by following the prompts on the Portal. Follow this step-by-step guide for detailed instructions on what to expect during the application process. All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120
-
SkilledTradesBC reviews the application package and verifies work experience with the employers and references provided.
Time: 6 to 8 weeksTime source
“The typical processing time is approximately six to eight weeks, or longer if you have work experience outside of Canada.”
skilledtradesbc.ca/index%2Ephp/experienced-workers-stc-tradesSource
“SkilledTradesBC will review your application package, verify your work experience with the employer(s)/references you provide and determine whether you have the necessary experience to challenge the certification exam.”
skilledtradesbc.ca/index%2Ephp/experienced-workers-stc-trades -
Approved applicants schedule their certification exam within 24 months of application approval.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Applicants write and pass the certification exam, and a practical assessment if applicable, to obtain certification.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Once all completion requirements are met, a certificate is mailed to the address on file.
Source
“Once you have met all of the completion requirements, a certificate will be mail to the address we have on file.”
skilledtradesbc.ca/index%2Ephp/experienced-workers-stc-trades
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Application | $120 | 100% |
| One-time total | $120 | 100% |
6 steps without a listed fee, so the total may not be the full cost.
Requirements
Experience
Applicants must have the required hours and scope of hands-on work experience in the trade.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
References must be contactable by phone to verify the applicant's work experience, or the application may be denied.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examApplicants must be able to schedule and pass the certification exam and practical assessments, if applicable, within 24 months of application approval.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examAll documents submitted with the application must be in English.
Source
“All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Direct transfer
SkilledTradesBC recognizes a Certificate of Qualification from a trade board in another Canadian province or territory, and holders do not have to re-certify or get a re-issued certificate. Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/labour-mobility
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Certification Exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Practical assessment
Source
“Some trades may also require a practical assessment in addition to the certification exam.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Level Exam
Source
“If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.”
skilledtradesbc.ca/architectural-sheet-metal-worker
Language tests
No minimum test score stated by the regulator Check with SkilledTradesBC
Exemptions: IELTS or CELPIP results are not required to become a skilled trade apprentice or to write an exam with SkilledTradesBC. Source
“No, this is not required to become a skilled trade apprentice or to write an exam with us.”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa...
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
No Job Bank wage or outlook data for this occupation yet.
Architectural sheet metal workers in other provinces and territories
- Alberta Not confirmed yet
- Saskatchewan Not confirmed yet
- Manitoba Not confirmed yet
- Ontario Not confirmed yet
- Quebec Not confirmed yet
- New Brunswick Not confirmed yet
- Nova Scotia Voluntary certification
- Prince Edward Island Not confirmed yet
- Newfoundland and Labrador Not confirmed yet
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Compare architectural sheet metal worker licensing across Canada
Sources checked
- Architectural Sheet Metal Worker | SkilledTradesBC skilledtradesbc.ca/architectural-sheet-metal-worker · fetched October 11, 2026
- Labour Mobility | SkilledTradesBC skilledtradesbc.ca/labour-mobility · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
- Experienced Workers in STC (Compulsory) Trades | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/experienced-workers-stc-trades · fetched October 9, 2026
- Newcomers and International Tradespersons | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa... · fetched October 11, 2026
Frequently asked questions
2
Do you need a licence to work as an architectural sheet metal worker in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Certification Exam, Practical assessment, Level Exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.