How to Become a Construction Craft Worker in Newfoundland and Labrador
Do you need certification?
Certification is voluntary
Construction craft worker is a voluntary trade in Newfoundland and Labrador. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“DESIGNATED TRADE Red Seal Trade Provincial Trade Training and Certification Certification Only (no training available) ... Construction Craft Worker”
From gov.nl.ca/atcd/designated-trades/list-of-designated-trades, checked October 10, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 2 steps
- Trained outside Canada: 1 step
- Annual fees
- Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Your roadmap
Apprenticeship and Trades Certification Division has no page of its own for this trade. These are the steps it gives for every designated trade in Newfoundland and Labrador.
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
Register as an Apprentice with the Apprenticeship and Trades Certification Division.
Source
“Register as an Apprentice with the Apprenticeship and Trades Certification Division”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... -
Talk to an Apprenticeship Program Officer to begin.
Source
“Talk to an Apprenticeship Program Officer to begin.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... -
You will be connected with a Program Development Specialist who will guide you through the RPL process.
Source
“You will then be connected with a Program Development Specialist who will guide you through the RPL process.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/...
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- 2 steps without a listed fee
-
Complete an application form if you hold a Certificate of Qualification from another Canadian province or territory.
Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
gov.nl.ca/atcd/journeypersons/cq -
The Apprenticeship and Trades Certification Division verifies your information and can provide an equivalency letter if you need one.
Source
“The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
2 steps without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 1 done
- 1 step without a listed fee
-
Follow the Division's Trade Qualifier Process to have your skills formally recognized.
Source
“If you are an internationally trained worker in a skilled trade, you will need to follow the Apprenticeship and Trades Certification Division’s Trade Qualifier Process to have your skills formally recognized.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/international-for...
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
1 step without a listed fee, so the total may not be the full cost.
Requirements
Experience
You need at least one and a half times the on-the-job work experience of an apprenticeship term in your trade.
Source
“At least one and a half (1.5) times the on-the-job work experience of an apprenticeship term in your trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Other
You need documentation of your work skills verified by a certified journeyperson in your trade.
Source
“Verified documentation of your work skills, verified by a certified journeyperson in your trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiersYou need documented verification of time and hours worked.
Source
“Documented verification of time and hours worked.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Already licensed in another province?
Direct transfer
If you have a Certificate of Qualification from another Canadian province or territory, you complete an application form and the Division verifies your information and provides an equivalency letter, with no retake of the entry-to-practice exam or competence assessment stated. Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form. The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Complete application form
Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
gov.nl.ca/atcd/journeypersons/cqReceive equivalency letter
Source
“The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Processing time: Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Credential assessment
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Exams
-
certification exam
Source
“A trade qualifier is someone who meets the requirements to write the certification exam for a specific trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
certification examination
Source
“Pass the certification examination and you will earn a Certificate of Qualification.”
gov.nl.ca/atcd/journeypersons/cq
Language tests
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Canadian experience
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Supervised practice
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| Newfoundland and Labrador | $16.00 | $22.00 | $39.45 | Limited (2 of 5) |
| Canada | $18.25 | $25.00 | $40.00 | — |
Wages by region and job outlook in Newfoundland and Labrador
Construction craft workers in other provinces and territories
- British Columbia Voluntary certification
- Alberta Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Voluntary certification
- Ontario Voluntary certification
- Quebec Certification required
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Not confirmed yet
Sources checked
- List of Designated Trades - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/designated-trades/list-of-designated-trades · fetched October 9, 2026
- Recognition of Prior Learning - Frequently Asked Questions - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... · fetched October 10, 2026
- Certificate of Qualification - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons/cq · fetched October 10, 2026
- International Skilled Workers - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/international-for... · fetched October 10, 2026
- Trade Qualifiers - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers · fetched October 10, 2026
Frequently asked questions
2
Do you need a licence to work as a construction craft worker in Newfoundland and Labrador?
No. Certification is available, but it is not required to work in the trade in Newfoundland and Labrador. Certification is managed by the Apprenticeship and Trades Certification Division.
Which exams are required?
certification exam, certification examination.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.