How to Become a Heavy Equipment Operator (dozer) in Newfoundland and Labrador
Do you need certification?
Certification is voluntary
Heavy equipment operator (dozer) is a voluntary trade in Newfoundland and Labrador. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Pass the certification examination and you will earn a Certificate of Qualification.”
From gov.nl.ca/atcd/journeypersons/cq, checked October 10, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: no separate route
- Licensed in another province: 2 steps
- Trained outside Canada: 6 steps
- Annual fees
- Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
No separate route for this group. Source
“You will still need to pass the certification exam to become a journeyperson, no matter how much credit you receive.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/...
Licensed in another province
0 of 2 done
- 2 steps without a listed fee
-
If you hold a Certificate of Qualification from another Canadian province or territory, you complete an application form.
Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
gov.nl.ca/atcd/journeypersons/cq -
The Apprenticeship and Trades Certification Division verifies your information and can provide an equivalency letter if you need one.
Source
“The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
2 steps without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 6 done
- 6 steps without a listed fee
-
You complete the Trade Qualifier Application to be Examined form.
Source
“1. Complete the Trade Qualifier Application to be Examined form”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
You complete the Record of Work Experience form.
Source
“2. Complete the Record of Work Experience form.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
If your employer or the journeyperson cannot verify your hours or skills, you contact an Apprenticeship Program Officer for help.
Source
“3. If your employer or the journeyperson is not available to verify your hours or skills, reach out to an Apprenticeship Program Officer for help.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
You submit your application and the required documents.
Source
“4. Submit your application and required documents.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
The Apprenticeship and Trades Certification Division reviews your application, and recognition of prior learning may be required in some cases.
Source
“Once your application is submitted, it will be reviewed by the Apprenticeship and Trades Certification Division. In some cases, recognition of prior learning may be required.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
If your application is approved, you are contacted to schedule your certification exam.
Source
“If your application is approved, you will be contacted to schedule your certification exam.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division
6 steps without a listed fee, so the total may not be the full cost.
Requirements
Experience
To become a trade qualifier, you need at least one and a half times the on-the-job work experience of an apprenticeship term in your trade.
Source
“- At least one and a half (1.5) times the on-the-job work experience of an apprenticeship term in your trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Other
You need verified documentation of your work skills, verified by a certified journeyperson in your trade.
Source
“- Verified documentation of your work skills, verified by a certified journeyperson in your trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiersYou need documented verification of time and hours worked.
Source
“- Documented verification of time and hours worked.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers
Already licensed in another province?
Not stated
The page says applicants with a Certificate of Qualification from another Canadian province or territory complete an application form and the division verifies their information, but it does not state whether they must retake an entry-to-practice exam or assessment. Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form. The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq
Complete application form
Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
gov.nl.ca/atcd/journeypersons/cq
Processing time: Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Credential assessment
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Exams
-
certification exam
Source
“A trade qualifier is someone who meets the requirements to write the certification exam for a specific trade.”
gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers -
Red Seal exam
Source
“If you have a provincial Certificate of Qualification in a Red Seal trade from another Canadian province or territory, and you wish to write the Red Seal exam, you will need to contact the apprenticeship authority that issued your certificate to request that they ask Newfoundland and Labrador to invigilate your Red Seal exam.”
gov.nl.ca/atcd/journeypersons/cq
Language tests
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Canadian experience
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Supervised practice
Not stated by the regulator Check with Apprenticeship and Trades Certification Division
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| Newfoundland and Labrador | $22.00 | $30.00 | $38.00 | Moderate (3 of 5) |
| Canada | $24.00 | $32.50 | $45.00 | — |
Wages by region and job outlook in Newfoundland and Labrador
Heavy equipment operators (dozer) in other provinces and territories
- British Columbia Not confirmed yet
- Alberta Not confirmed yet
- Saskatchewan Not confirmed yet
- Manitoba Not confirmed yet
- Ontario Voluntary certification
- Quebec Certification required
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Yukon Not confirmed yet
- Northwest Territories Not confirmed yet
- Nunavut Voluntary certification
Compare heavy equipment operator (dozer) licensing across Canada
Sources checked
- Certificate of Qualification - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons/cq · fetched October 10, 2026
- Recognition of Prior Learning - Frequently Asked Questions - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... · fetched October 10, 2026
- International Skilled Workers - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/international-for... · fetched October 10, 2026
- Trade Qualifiers - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers · fetched October 10, 2026
Frequently asked questions
2
Do you need a licence to work as a heavy equipment operator (dozer) in Newfoundland and Labrador?
No. Certification is available, but it is not required to work in the trade in Newfoundland and Labrador. Certification is managed by the Apprenticeship and Trades Certification Division.
Which exams are required?
certification exam, Red Seal exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.