How to Become an Instrumentation and Control Technician in British Columbia
Do you need certification?
Certification is voluntary
Instrumentation and control technician is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“Instrumentation and Control Technician”
From skilledtradesbc.ca/find-your-trade, checked October 10, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Licensed in another province: 2 steps, listed one-time fees $120
- Trained outside Canada: 5 steps (1 fee depends on your situation and is not in the total)
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Licensed in another province
0 of 2 done
- Listed one-time fees: $120
- 1 step without a listed fee
-
Submit an exam application, a photocopy of your Certificate of Qualification, and the assessment fee to Customer Service.
- Out-of-province assessment fee: $120
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Source
“Please submit the following documents to Customer Service: - Exam Application - A photocopy of your Certificate of Qualification - $120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holders - Out-of-province assessment fee: $120
-
Apply to write the Red Seal exam to obtain the Red Seal Endorsement.
Source
“you may be eligible to obtain a Red Seal Endorsement by applying to write the Red Seal exam.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Assessment | $120 | 100% |
| One-time total | $120 | 100% |
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 5 done
- 1 fee depends on your situation and is not in the total
- 4 steps without a listed fee
- Listed time: 1.8 to 2.3 months (only 1 of 5 steps state a time)
-
Search for your trade and review the program requirements and declaration forms to confirm you are eligible to challenge the certification exam.
Source
“Check the program requirements and your eligibility ... Review the Employer Declaration or Statutory Declaration form (near the bottom of your trade page), where you can find the hours of work experience, percentage of job task experience and any prerequisite credentials required.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Once eligibility is confirmed, create an account on the SkilledTradesBC Portal by selecting the option to challenge a certification exam.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Complete and submit your application through the Portal along with an Employer or Statutory Declaration for each period of work experience, with all documents in English.
- Application fee: $120 (paid through the Portal when submitting the application)
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Complete and submit your application by following the prompts on the Portal. ... For each period of work experience listed on your application, you must submit an Employer or Statutory Declaration (near the bottom of your trade page).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120 (paid through the Portal when submitting the application)
-
Wait to be notified of the outcome of your application review.
Time: 8 to 10 weeksTime source
“Currently, it takes 8 to 10 weeks for an application to get reviewed and processed.”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa...Source
“Get notified of your application result”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Schedule and pass the certification exam and any practical assessments within 24 months of application approval.
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
1 fee depends on your situation and is not in the total.
4 steps without a listed fee, so the total may not be the full cost.
Requirements
Experience
You must have the required hours and scope of hands-on work experience in the trade before applying to challenge the certification exam.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
Your references will be contacted by phone to verify your work experience, and if they cannot be contacted the application will be denied.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Already licensed in another province?
Extra steps
A tradesperson holding a Certificate in the trade from another Canadian jurisdiction may obtain a Red Seal Endorsement by submitting an exam application, a photocopy of their Certificate of Qualification, and a $120 out-of-province assessment fee, and writing the Red Seal exam. Source
“If you hold a Certificate in a skilled trade outside of B.C. from another provincial apprenticeship authority or Canadian jurisdiction, you may be eligible to obtain a Red Seal Endorsement.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Submit documents and fee
Source
“Please submit the following documents to Customer Service: - Exam Application - A photocopy of your Certificate of Qualification - $120 out-of-province assessment fee.”
skilledtradesbc.ca/canadian-and-military-certificate-holdersWrite the Red Seal exam
Source
“you may be eligible to obtain a Red Seal Endorsement by applying to write the Red Seal exam.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
Certification exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Red Seal exam
Source
“you may be eligible to obtain a Red Seal Endorsement by applying to write the Red Seal exam.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Language tests
No minimum test score stated by the regulator Check with SkilledTradesBC
Exemptions: IELTS or CELPIP results are not required to become a skilled trade apprentice or to write an exam with SkilledTradesBC. Source
“No, this is not required to become a skilled trade apprentice or to write an exam with us.”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa...
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| British Columbia | $31.00 | $46.00 | $48.50 | Limited (2 of 5) |
| Canada | $31.00 | $46.00 | $65.78 | — |
Instrumentations and control technicians in other provinces and territories
- Alberta Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Certification required
- Ontario Voluntary certification
- Quebec Not confirmed yet
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Newfoundland and Labrador Voluntary certification
- Yukon Voluntary certification
- Northwest Territories Voluntary certification
- Nunavut Voluntary certification
Compare instrumentation and control technician licensing across Canada
Sources checked
- Find Your Trade | SkilledTradesBC skilledtradesbc.ca/find-your-trade · fetched October 9, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 10, 2026
- Newcomers and International Tradespersons | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa... · fetched October 10, 2026
Frequently asked questions
2
Do you need a licence to work as an instrumentation and control technician in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
Certification exam, Red Seal exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.