How to Become an Industrial Mechanic (millwright) in Alberta
Do you need certification?
Certification is voluntary
Industrial mechanic (millwright) is a voluntary trade in Alberta. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“you do not have to be certified if you are self-employed or work for an employer who is satisfied that you have the skills and knowledge expected of a journeyperson certified by Alberta Apprenticeship and Industry Training”
From alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan..., checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 1 step
- Trained outside Canada: 1 step
- Annual fees
- Not stated by the regulator Check with Alberta Apprenticeship and Industry Training
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
You must find an employer who is willing to hire and train you as an apprentice.
Source
“Apprentices must find suitable employers who are willing to hire and train apprentices.”
alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan... -
To learn the trade you must become a registered apprentice.
Source
“To learn the trade, you must become a registered apprentice.”
alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan... -
Before you enroll in classes as a registered apprentice, you need to meet the entrance requirements.
Source
“Before you enroll in classes as a registered apprentice, you'll need to meet the entrance requirements.”
tradesecrets.alberta.ca/get-started/become-an-apprentice/eligibilit...
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Alberta Apprenticeship and Industry Training
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 1 done
- 1 step without a listed fee
-
You must submit a copy of a trade certificate from outside Alberta that is recognized.
Source
“Submit a copy of a recognized trade certificate from outside Alberta.”
tradesecrets.alberta.ca/trades-in-alberta/profiles/016
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Alberta Apprenticeship and Industry Training
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 1 done
- 1 step without a listed fee
-
You must submit a copy of a trade certificate from outside Alberta that is recognized.
Source
“Submit a copy of a recognized trade certificate from outside Alberta.”
tradesecrets.alberta.ca/trades-in-alberta/profiles/016
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with Alberta Apprenticeship and Industry Training
1 step without a listed fee, so the total may not be the full cost.
Other listed fees
The regulator lists these without tying them to one step, so they are not in the route totals above. Check which apply to you.
- PLA exam fee: $150
Source
“Industrial Mechanic (Millwright) | 1,2,3,4 | $150.00 each | n/a”
tradesecrets.alberta.ca/get-started/become-an-apprentice/prior-lear... - PLA entrance exam application fee: $150
Source
“There is a $150 fee for this application.”
tradesecrets.alberta.ca/get-started/become-an-apprentice/prior-lear...
Requirements
Education
Applicants for the Trades Qualifier Recognized Credentials Program must hold a recognized trade certificate from outside Alberta.
Source
“Submit a copy of a recognized trade certificate from outside Alberta.”
tradesecrets.alberta.ca/trades-in-alberta/profiles/016
Experience
Applicants for the Trades Qualifier Work Experience Program must complete 72 months and 9360 hours of verifiable Industrial Mechanic (Millwright) work experience.
Source
“Complete 72 months and 9360 hours of verifiable Industrial Mechanic (Millwright) work experience.”
tradesecrets.alberta.ca/trades-in-alberta/profiles/016
Other
Apprentices must find suitable employers who are willing to hire and train apprentices.
Source
“Apprentices must find suitable employers who are willing to hire and train apprentices.”
alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan...
Already licensed in another province?
Extra steps
Industrial mechanics (millwrights) trained in other provinces can work in Alberta if they hold a recognized certificate or licence, and under the Recognized Credentials Program they must submit their certificate and pass a theory exam. Source
“Industrial mechanics (millwrights) trained in other provinces and territories can work in Alberta if they hold a certificate or license recognized by the Alberta or have the skills and knowledge expected of a journeyperson certified in Alberta.”
alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan...
Submit recognized trade certificate
Source
“Submit a copy of a recognized trade certificate from outside Alberta.”
tradesecrets.alberta.ca/trades-in-alberta/profiles/016
Processing time: Not stated by the regulator Check with Alberta Apprenticeship and Industry Training
Credential assessment
Not stated by the regulator Check with Alberta Apprenticeship and Industry Training
Exams
-
entrance exam
Source
“If you don’t meet the high school entrance requirements, you’ll need to pass an entrance exam before registering in apprenticeship classroom instruction.”
tradesecrets.alberta.ca/apprentice-services/prepare-for-an-exam/typ...
Language tests
No minimum test score stated by the regulator Check with Alberta Apprenticeship and Industry Training
Exemptions: The pages do not state any language test exemptions. Source
“The certification information in this profile may change at any time and without notice.”
alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan...
Canadian experience
The pages do not state any Canadian experience requirement. Source
“Industrial mechanics (millwrights) trained in other provinces and territories can work in Alberta if they hold a certificate or license recognized by the Alberta or have the skills and knowledge expected of a journeyperson certified in Alberta.”
alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan...
Supervised practice
Not required
The pages do not state any supervised practice requirement. Source
“To perform restricted activities, you must be: - a registered apprentice, or - working at a journeyperson level in the opinion of your employer (journeyperson certification optional).”
tradesecrets.alberta.ca/trades-in-alberta/profiles/016
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| Alberta | $27.95 | $42.00 | $59.63 | Moderate (3 of 5) |
| Canada | $24.00 | $37.00 | $52.00 | — |
Industrial mechanics (millwright) in other provinces and territories
- British Columbia Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Voluntary certification
- Ontario Voluntary certification
- Quebec Certification required
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Newfoundland and Labrador Voluntary certification
- Yukon Voluntary certification
- Northwest Territories Voluntary certification
- Nunavut Voluntary certification
Compare industrial mechanic (millwright) licensing across Canada
Sources checked
- Industrial Mechanic (Millwright): Certifications in Alberta - alis alis.alberta.ca/occinfo/certifications-in-alberta/industrial-mechan... · fetched October 8, 2026
- Tradesecrets - Meet Requirements tradesecrets.alberta.ca/get-started/become-an-apprentice/eligibilit... · fetched October 9, 2026
- Tradesecrets - Industrial Mechanic (Millwright) tradesecrets.alberta.ca/trades-in-alberta/profiles/016 · fetched October 10, 2026
- Tradesecrets - Prior Learning Assessments tradesecrets.alberta.ca/get-started/become-an-apprentice/prior-lear... · fetched October 9, 2026
- Tradesecrets - Types of Exams tradesecrets.alberta.ca/apprentice-services/prepare-for-an-exam/typ... · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as an industrial mechanic (millwright) in Alberta?
No. Certification is available, but it is not required to work in the trade in Alberta. Certification is managed by Alberta Apprenticeship and Industry Training.
Which exams are required?
entrance exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.