How to Become an Industrial Mechanic (millwright) in British Columbia
Do you need certification?
Certification is voluntary
Industrial mechanic (millwright) is a voluntary trade in British Columbia. You can work in the trade without a certificate.
- Protected titles
- Not listed in the sources checked
Show the source
“If you have work experience in the trade but have never been certified in Canada, you may be eligible to challenge the certification exam as a Trade Qualifier to become certified without going through an apprenticeship program.”
From skilledtradesbc.ca/industrial-mechanic-millwright, checked October 11, 2026.
At a glance
- Licence status
- Voluntary certification See the source
- Routes
-
- Trained in Canada: 3 steps
- Licensed in another province: 2 steps, listed one-time fees $120
- Trained outside Canada: 5 steps, listed one-time fees $120
- Annual fees
- Not stated by the regulator Check with SkilledTradesBC
Your roadmap
Tick each step as you finish it. Your ticks are kept in this browser only.
Trained in Canada
0 of 3 done
- 3 steps without a listed fee
-
You must have an employer or sponsor who is willing to sponsor and register you as an apprentice.
Source
“have an employer/or sponsor who is willing to sponsor and register you as an apprentice”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa... -
You must meet any registration prerequisites required for your trade.
Source
“meet any required registration prerequisites for your trade”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa... -
You register with SkilledTradesBC to become an apprentice.
Source
“register with SkilledTradesBC”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa...
Listed fees for this route
No one-time fees listed by the regulator for these steps Check with SkilledTradesBC
3 steps without a listed fee, so the total may not be the full cost.
Licensed in another province
0 of 2 done
- Listed one-time fees: $120
- 1 step without a listed fee
-
You submit an exam application and a photocopy of your Certificate of Qualification to Customer Service.
Source
“Please submit the following documents to Customer Service:”
skilledtradesbc.ca/canadian-and-military-certificate-holders -
You pay the $120 out-of-province assessment fee with your application.
- Out-of-province assessment fee: $120
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Source
“$120 out-of-province assessment fee. You can pay online, by mail or with a cheque (payable to SkilledTradesBC) with your application.”
skilledtradesbc.ca/canadian-and-military-certificate-holders - Out-of-province assessment fee: $120
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Application | $120 | 100% |
| One-time total | $120 | 100% |
1 step without a listed fee, so the total may not be the full cost.
Trained outside Canada
0 of 5 done
- Listed one-time fees: $120
- 4 steps without a listed fee
- Listed time: 24 months (only 1 of 5 steps state a time)
-
You review the Employer Declaration or Statutory Declaration form on your trade page to find the required hours of work experience, percentage of job task experience and any prerequisite credentials.
Source
“Review the Employer Declaration or Statutory Declaration form (near the bottom of your trade page), where you can find the hours of work experience, percentage of job task experience and any prerequisite credentials required.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
You create a SkilledTradesBC Portal account, selecting the option to challenge a certification exam to start your application.
Source
“Once you’ve confirmed your eligibility, create a SkilledTradesBC Portal account by selecting the option to challenge a certification exam to start your application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
You complete and submit your application through the Portal, including an Employer or Statutory Declaration for each period of work experience.
Source
“Complete and submit your application by following the prompts on the Portal.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
You pay the $120 application fee through the Portal and submit your application and declaration forms.
- Application fee: $120
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Source
“Pay the $120 application fee through the Portal and submit your application and declaration form(s).”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam - Application fee: $120
-
You schedule and pass your certification exam and any applicable practical assessments within 24 months of your application approval.
Time: 24 monthsTime source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examSource
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Listed fees for this route
One-time total listed: $120
| Fee type | Amount | Share |
|---|---|---|
| Application | $120 | 100% |
| One-time total | $120 | 100% |
4 steps without a listed fee, so the total may not be the full cost.
Requirements
Education
Canadian military trade certification holders must show proof of a Canadian Military Trade Certification and a Military ranking at QL5 or higher.
Source
“If you can show proof of a Canadian Military Trade Certification, with proof of a Military ranking at QL5 or higher, you can provide this information while applying to become a Trade Qualifier through the Portal.”
skilledtradesbc.ca/canadian-and-military-certificate-holders
Experience
You must have the required hours and scope of hands-on work experience in the trade.
Source
“You have the required hours and scope of hands-on work experience in the trade.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam
Other
Your references will be contacted by phone to verify your work experience, and a denied application can result if they cannot be contacted.
Source
“Your references will be contacted by phone to verify your work experience. If references cannot be contacted, it will result in a denied application.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examAll documents submitted with your application must be in English.
Source
“All documents submitted must be in English.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-examTo be employed as an apprentice, you must be legally authorized to work in Canada.
Source
“To be employed as an apprentice, you must be legally authorized to work in Canada.”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa...
Already licensed in another province?
Direct transfer
If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it and you will not have to re-certify or get a re-issued certificate. Source
“If you hold a Certificate of Qualification from a trade board in Canada, SkilledTradesBC will recognize it. You will not have to re-certify or get a re-issued certificate.”
skilledtradesbc.ca/labour-mobility
Processing time: Not stated by the regulator Check with SkilledTradesBC
Credential assessment
Not stated by the regulator Check with SkilledTradesBC
Exams
-
certification exam
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
practical assessments
Source
“You can schedule and pass your certification exam and practical assessments, if applicable, within 24 months of your application approval.”
skilledtradesbc.ca/index%2Ephp/challenge-certification-exam -
Interprovincial Red Seal Exam
-
Harmonized Level 1 Standardized Level Exam
-
Harmonized Level 2 Standardized Level Exam
-
Harmonized Level 3 Standardized Level Exam
-
level exam
Source
“If you have some practical experience but do not yet qualify for the certification exam, you may be eligible to challenge a level exam to enter the program at the appropriate level.”
skilledtradesbc.ca/industrial-mechanic-millwright
Language tests
No minimum test score stated by the regulator Check with SkilledTradesBC
Exemptions: IELTS or CELPIP results are not required to become a skilled trade apprentice or to write an exam with SkilledTradesBC. Source
“No, this is not required to become a skilled trade apprentice or to write an exam with us.”
skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa...
Canadian experience
Not stated by the regulator Check with SkilledTradesBC
Supervised practice
Not stated by the regulator Check with SkilledTradesBC
Demand and pay
| Where | Low | Median | High | Outlook |
|---|---|---|---|---|
| British Columbia | $25.25 | $42.00 | $55.00 | Moderate (3 of 5) |
| Canada | $24.00 | $37.00 | $52.00 | — |
Industrial mechanics (millwright) in other provinces and territories
- Alberta Voluntary certification
- Saskatchewan Voluntary certification
- Manitoba Voluntary certification
- Ontario Voluntary certification
- Quebec Certification required
- New Brunswick Voluntary certification
- Nova Scotia Voluntary certification
- Prince Edward Island Voluntary certification
- Newfoundland and Labrador Voluntary certification
- Yukon Voluntary certification
- Northwest Territories Voluntary certification
- Nunavut Voluntary certification
Compare industrial mechanic (millwright) licensing across Canada
Sources checked
- Industrial Mechanic (Millwright) | SkilledTradesBC skilledtradesbc.ca/industrial-mechanic-millwright · fetched October 11, 2026
- Newcomers and International Tradespersons | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/get-certified/newcomers-internationa... · fetched October 11, 2026
- Canadian and Military Certificate Holders | SkilledTradesBC skilledtradesbc.ca/canadian-and-military-certificate-holders · fetched October 9, 2026
- Challenge a Certification Exam | SkilledTradesBC skilledtradesbc.ca/index%2Ephp/challenge-certification-exam · fetched October 11, 2026
- Labour Mobility | SkilledTradesBC skilledtradesbc.ca/labour-mobility · fetched October 9, 2026
Frequently asked questions
2
Do you need a licence to work as an industrial mechanic (millwright) in British Columbia?
No. Certification is available, but it is not required to work in the trade in British Columbia. Certification is managed by SkilledTradesBC.
Which exams are required?
certification exam, practical assessments, Interprovincial Red Seal Exam, Harmonized Level 1 Standardized Level Exam, Harmonized Level 2 Standardized Level Exam, Harmonized Level 3 Standardized Level Exam, level exam.
Getting Licensed? Get Your Resume Ready Too
Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.
Schedule a CallFree consultation. No commitment.