Licensing guide · Newfoundland and Labrador

How to Become an Industrial Mechanic (millwright) in Newfoundland and Labrador

Last checked 4 sources checkedNOC 72400

Do you need certification?

Certification is voluntary

Industrial mechanic (millwright) is a voluntary trade in Newfoundland and Labrador. You can work in the trade without a certificate.

Protected titles
Not listed in the sources checked
Show the source
“DESIGNATED TRADE Red Seal Trade Provincial Trade Training and Certification Certification Only (no training available) ... Industrial Mechanic (Millwright)”

From gov.nl.ca/atcd/designated-trades/list-of-designated-trades, checked October 10, 2026.

At a glance

Licence status
Voluntary certification See the source
Routes
Annual fees
Not stated by the regulator Check with Apprenticeship and Trades Certification Division

Your roadmap

Every route is listed. Follow the one that matches where you trained.

Trained in Canada

  • 4 steps without a listed fee

  1. Register as an apprentice with the Apprenticeship and Trades Certification Division.

    Source
    “1. Register as an Apprentice with the Apprenticeship and Trades Certification Division”
    gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/...

  2. Talk to an Apprenticeship Program Officer to begin the process.

    Source
    “Talk to an Apprenticeship Program Officer to begin.”
    gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/...

  3. You will be connected with a Program Development Specialist who guides you through the RPL process.

    Source
    “You will then be connected with a Program Development Specialist who will guide you through the RPL process.”
    gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/...

  4. Pass the certification examination to earn a Certificate of Qualification.

    Source
    “Pass the certification examination and you will earn a Certificate of Qualification. Registered apprentices will also receive a Certificate of Apprenticeship.”
    gov.nl.ca/atcd/journeypersons/cq

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division

4 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Licensed in another province

  • 2 steps without a listed fee

  1. Complete an application form if you hold a Certificate of Qualification from another Canadian province or territory.

    Source
    “If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
    gov.nl.ca/atcd/journeypersons/cq

  2. The Apprenticeship and Trades Certification Division verifies your information and can provide an equivalency letter if needed.

    Source
    “The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
    gov.nl.ca/atcd/journeypersons/cq

Listed fees for this route

No one-time fees listed by the regulator for these steps Check with Apprenticeship and Trades Certification Division

2 steps without a listed fee, so the total may not be the full cost.

Official page for this route

Trained outside Canada

No separate route for this group.

Source
“Recognizing Certification from Another Country”
gov.nl.ca/atcd/journeypersons/cq

Official page for this route

Requirements

Conditions the regulator sets on top of the roadmap steps.

Experience

Already licensed in another province?

Direct transfer

If you have a Certificate of Qualification from another Canadian province or territory, you complete an application form and the division verifies your information and can provide an equivalency letter.

Source
“If you have a Certificate of Qualification from another Canadian province or territory, complete an application form. The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
gov.nl.ca/atcd/journeypersons/cq

  1. Complete an application form

    Source
    “If you have a Certificate of Qualification from another Canadian province or territory, complete an application form.”
    gov.nl.ca/atcd/journeypersons/cq

  2. Division verifies information

    Source
    “The Apprenticeship and Trades Certification Division will verify your information and provide an equivalency letter if you require one for your employer or a regulatory body.”
    gov.nl.ca/atcd/journeypersons/cq

Processing time: Not stated by the regulator Check with Apprenticeship and Trades Certification Division

Check a move between two provinces

Credential assessment

Not stated by the regulator Check with Apprenticeship and Trades Certification Division

Exams

  • certification examination

    Source
    “Pass the certification examination and you will earn a Certificate of Qualification.”
    gov.nl.ca/atcd/journeypersons/cq

  • Red Seal exam

    Source
    “If you have a provincial Certificate of Qualification in a Red Seal trade from another Canadian province or territory, and you wish to write the Red Seal exam, you will need to contact the apprenticeship authority that issued your certificate to request that they ask Newfoundland and Labrador to invigilate your Red Seal exam.”
    gov.nl.ca/atcd/journeypersons/cq

    Which provinces ask for the Red Seal exam

Language tests

Not stated by the regulator Check with Apprenticeship and Trades Certification Division

Compare scores across provinces and professions

Canadian experience

Not stated by the regulator Check with Apprenticeship and Trades Certification Division

Supervised practice

Not stated by the regulator Check with Apprenticeship and Trades Certification Division

Demand and pay

Job Bank figures for NOC 72400, Construction millwrights and industrial mechanics. Wages for 2023-2024 in Canadian dollars an hour; outlook for 2025-2027.

Job Bank wages and outlook in Newfoundland and Labrador and Canada
WhereLowMedianHighOutlook
Newfoundland and Labrador $26.00 $42.35 $57.30 Good (4 of 5)
Canada $24.00 $37.00 $52.00 —

Wages by region and job outlook in Newfoundland and Labrador

Wages in every province and territory

Industrial mechanics (millwright) in other provinces and territories

Regulated in all 12 other jurisdictions checked so far. The rules differ from one place to the next.

Compare industrial mechanic (millwright) licensing across Canada

Sources checked

Pages read on October 10, 2026.

  1. List of Designated Trades - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/designated-trades/list-of-designated-trades · fetched October 9, 2026
  2. Recognition of Prior Learning - Frequently Asked Questions - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons-and-skilled-workers/trade-qualifiers/... · fetched October 10, 2026
  3. Certificate of Qualification - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/journeypersons/cq · fetched October 10, 2026
  4. Industrial Mechanic (Millwright) Trade Profile - Apprenticeship and Trades Certification Division gov.nl.ca/atcd/designated-trades/trade-profiles/industrial-mechanic... · fetched October 10, 2026

Frequently asked questions

2

Do you need a licence to work as an industrial mechanic (millwright) in Newfoundland and Labrador?

No. Certification is available, but it is not required to work in the trade in Newfoundland and Labrador. Certification is managed by the Apprenticeship and Trades Certification Division.

Which exams are required?

certification examination, Red Seal exam.

Getting Licensed? Get Your Resume Ready Too

Nainly pairs expert resume assessment with a done-for-you career marketing campaign, so your profile keeps reaching decision-makers while you work through the licensing steps.

Schedule a Call

Free consultation. No commitment.